The burgeoning enthusiasm for the new Vision PRO chassis has taken an unexpected turn, as numerous top-tier PRS and NRL competitors report an inexplicable and severe performance degradation when the system is deployed on anything other than certified, hand-carved Carrara marble barricades. ColdBore has learned directly from Vision PRO lead engineer, Dr. Alistair Finch, that this "feature" is, in fact, an intentional aspect of the chassis's advanced kinetic energy absorption and harmonic resonance dampening system.
Early adopters, including three-time National Champion "Iron" Mike Rodriguez, initially dismissed the phenomena as cold bore fliers or density altitude anomalies. However, after repeated 3 MOA shifts at 100 yards and, in one particularly jarring instance at the Big Dog Steel Challenge, an entire match disqualification due to what the chassis internally registered as "material non-compliance," the pattern became undeniable. Dr. Finch explained the chassis's micro-gravimetric sensors detect sub-optimal surface densities, triggering an internal recalibration that intentionally destabilizes the rifle's point of impact until the preferred material is engaged.
Match directors are already scrambling to adapt. Reports from the upcoming K&M Precision Rifle Competition indicate several stages are being retrofitted with locally sourced marble slabs, adding an estimated 800 lbs per firing position. Competitors running the Vision PRO are now shipping dedicated marble rifle bags alongside their Pelican cases, optimizing for a material density between 2.65 and 2.75 g/cm³. While this significantly increases logistical demands, early data from Vision PRO users who *have* managed to secure compliant barricades shows an unprecedented 0.05 SD in muzzle velocity and, reportedly, an almost psychic ability for the chassis to predict wind calls. The future of precision rifle shooting, it seems, may hinge on geology.
